Difference between revisions of "Getting Started with the CC01 (Arduino)"

From XinaBox Wiki!
Jump to: navigation, search
 
Line 71: Line 71:
 
==Device Programming==
 
==Device Programming==
 
#  Compatible Programmers
 
#  Compatible Programmers
 +
#* [[IP01]]
 
#* [[IP02]]  
 
#* [[IP02]]  
#* [[IP03]]  
+
# If [[IP02]] or [[IP01]] is not detected install the required FTDI Drivers  
#  If [[IP02]] is not detected install the required FTDI Drivers  
 
  
 
==Featured Samples==
 
==Featured Samples==

Latest revision as of 01:53, 14 June 2019

CC01 - Arduino Pro/Pro Mini(ATmega328P)
CC01 V1.0.0 Front.JPG
Front
CC01 V1.0.0 Back.JPG
Back
Main Category Core
Sub Category CPU
Introduced 1 January 2017; 2 years ago (2017-01-01)
Current version 1.0.0
Current version date 1 November 2017; 19 months ago (2017-11-01)
Size 2x2U (32x32mm)
Weight 3.1 g
Height 4.1/1.6/0 mm
South ☒BUS & ☒PDI
Main Chip ATmega328P
Architecture AVR®
Core Size 8 bit
Max. Frequency 16 MHz
Program Memory Size 32 kB Flash
EEPROM Memory Size 1 kB
RAM Memory Size 2 kB SRAM
I2C Speed 100/400 kHz
Programmers IP01, IP02
IP02 Settings A, DTE
Default Setting DTE
Change Setting DCE
RXD 0
TXD 1
SDA 4
SCL 5
Red pin 5
Green pin 6
Blue Pin 7

Which Board to Select from Tool Menu

  1. Install Arduino-AVR Core
  2. Select Board -> Arduino Pro or Pro Mini
  3. COM Port (if not found go to Device Programming)

Device Programming

  1. Compatible Programmers
  2. If IP02 or IP01 is not detected install the required FTDI Drivers

Featured Samples

No samples available at this time

Featured Projects

  1. Atmospheric Pressure Measurement Using XinaBox ☒CHIPs
  2. Easy Peasy Temperature Monitor
  3. https://www.hackster.io/Luqmaan/servo-control-with-capacitive-touch-using-xinabox-cd0c36
  4. more

External Links

Datasheets

Shop

GitHub