Phase 1A - Assembling your ☒CHIPS

From XinaBox Wiki!
Revision as of 23:45, 4 July 2018 by Bg (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

For Phase 1A you will need the following ☒CHIPS:

  • CW01 - Wi-Fi ☒CHIP
  • IP01 - Programmer ☒CHIP
  • OD01 - Display ☒CHIP
  • SW01 - Advanced Weather Sensor ☒CHIP
  • SL01 - Light Sensor ☒CHIP
  • Connectors

1st Time Setup (after flashing) and Phase 1A requires these ☒CHIPS connected as shown below:

Phase 1A ☒CHIPS connected