IP01 - USB Programming Interface

From XinaBox Wiki!
(Redirected from IP01)
Jump to: navigation, search
IP01 - USB Programming Interface (FT232R)
IP01 V1.0.4 Front.JPG
Front
IP01 V1.0.4 Back.JPG
Back
Main Category Interface
Sub Category Programmer
Introduced 1 January 2017; 2 years ago (2017-01-01)
Current version 1.0.4
Current version date 1 January 2017; 2 years ago (2017-01-01)
Weight 5.4 g
Height 5.9/5.4/1.6 mm
South USB A
Main Chip FT232R
EEPROM Memory Size 1024 bit
Ftdi 1.gif
FTDI Chip
Default Setting DCE/DTE and A/B
Change Setting Switch


Overview

This xChip forms part of the interface programmer modules.

The FT232R is a USB to serial UART interface device which is equipped to power and program other modules via a USB A connector. The IP01 is required for programming the range of CPU Core xChip over the USB-serial bridge provided by the FT232R.

The IP01 is unable to program the CC03, whereaas the IP02 is able to do so.

Product Highlights

  • Based on FT232R From FTDI Limited
  • USB A connector for simple connectivity without the need of a cable
  • Programming interface for core ☒CHIPs such as CW01, CR01 and CC01
  • Equipped with switches that allow the user to switch serial and programming configurations
  • RGB LED for programming indicators

Applications

  • Serial Programming of ☒CHIPS
  • Serial Interface for debugging
  • Serial Data Monitoring
  • USB-Serial Internet Link for IoT Devices

Specifications

  • Single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 1024 bit EEPROM for storing device descriptors.
  • Data transfer rates from 300 baud to 3 Mbaud.
  • 128 byte receive buffer and 256 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
  • Unique USB FTDIChip-ID™ feature.
  • Transmit and receive LED signals.
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
  • FIFO receives and transmits buffers for high data throughput.
  • Device supplied pre-programmed with unique USB serial number.
  • UART signal inversion option.
  • Low operating and USB suspend current.
  • Low USB bandwidth consumption.
  • UHCI/OHCI/EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • -40°C to 85°C extended operating temperature range.

External Links

Datasheets

Shop

GitHub

Drivers