Getting Started with the CW02

From XinaBox Wiki!
Jump to: navigation, search
CW02 - Wi-Fi & Bluetooth Core (ESP-WROOM-32)
CW02 V0.5.1 Front.JPG
Front
CW02 V0.5.1 Back.JPG
Back
Main Category Core
Sub Category Wi-Fi
Introduced 1 August 2017; 3 years ago (2017-08-01)
Current version 1.0.0
Current version date 1 February 2018; 2 years ago (2018-02-01)
Size 2x2U (32x32mm)
Weight 5.5 g
Height 6.4/1.7/3.0 mm
North Wi-Fi antenna
Main Chip ESP-WROOM-32
Architecture Xtensa®
Core Size 32 bit
Max. Frequency 240 MHz Core, 40 MHz only for Wi-Fi/BT functionality
Program Memory Size 4 MB SPI Flash
EEPROM Memory Size 448 kB
RAM Memory Size 520 kB SRAM
I2C Speed 100/400 kHz
Espressif-logo-pratik-panda-clients-2.png
Espressif Systems
Programmer IP01
Default Setting DTE
Change Setting DCE
RXD 3
TXD 1
SDA 21
SCL 22
Red pin 25
Green pin 26
Blue Pin 27

Which Board to Select from Tool Menu

  1. Install ESP32 Arduino Core
  2. Select Board -> XinaBox CW02
  3. COM Port (if not found go to Device Programming)

Device Programming

  1. Compatible Programmers
  2. If IP02/IP01 is not detected install the required FTDI Drivers

Featured Samples

  1. Magnet Sensor
  2. Speed Tap Game
  3. Blink


Featured Projects

  1. Virtual Door Button


External Links

Datasheet

Shop

GitHub