Getting Started with the CW01
From XinaBox Wiki!
 Front | |
 Back | |
| ☒CHIP | |
|---|---|
| Main Category | Core |
| Sub Category | Wireless |
| Introduced | 1 August 2016 |
| Current version | 1.0.0 |
| Current version date | 14 July 2017 |
| Dimensions | |
| Size | 2x2U (32x32mm) |
| Weight | 4.4 g |
| Height | 6.4/3/0.3 mm |
| Non-☒BUS Connections | |
| North | PCB Antenna |
| Power | |
| Vcc (3.3v) Power Consumption | 170 mAh |
| Main Chip Set | |
| Main Chip | EPS8266EX |
| Architecture | Tensilica L106 |
| Core Size | 32 bit |
| Max. Frequency | 80 MHz |
| Program Memory Size | 4 MB of External QSPI flash |
| RAM Memory Size | 64 kB of instruction RAM, 96 kB of data RAM |
| I2C Speed | 100 kHz |
| Powered By | |
 Espressif | |
| Programmer Setting | |
| Programmer | IP01 |
| Settings | DCE and B |
| Serial Configuration | |
| Default Setting | DTE |
| Change Setting | DCE via solder pads |
| UART Configuration | |
| RXD | RXD0 |
| TXD | TXD0 |
| I²C Configuration | |
| SDA | 2 |
| SCL | 14 |
| LED Configuration | |
| Red pin | 12 |
| Green pin | 13 |
| Blue Pin | 5 |
Contents
Which Board to Select from Tool Menu
- Install ESP8266 Modules Core
- Select Board -> XinaBox CW01
- COM Port (if not found go to Device Programming)
Device Programming
Featured Samples
Featured Projects
- Atmospheric Pressure Measurement Using XinaBox ☒CHIPs
- Easy Peasy Temperature Monitor
- https://www.hackster.io/Luqmaan/servo-control-with-capacitive-touch-using-xinabox-cd0c36
- more
External Links
Datasheets
Shop
GitHub
