Getting Started with the CR13 (Arduino)

From XinaBox Wiki!
Jump to: navigation, search
CR13
CR12 V0.5.0 Front.JPG
Front
CR12 V0.5.0 Back.JPG
Back
Main Category Core
Sub Category Radio
Introduced 1 January 2017; 2 years ago (2017-01-01)
Current version 1.0.0
Current version date 1 January 2017; 2 years ago (2017-01-01)
Size 2x2U (32x32 mm)
Weight 5.2 g
Height 7.9/1/1.8 mm
North SMA Female Connector (7.5 mm)
South ☒BUS & ☒PDI
Main Chip ATmega328P
Architecture AVR
Core Size 8-Bit
Max. Frequency 16 MHz
Program Memory Size 32 kB
EEPROM Memory Size 1 kB
RAM Memory Size 2 kB
I2C Speed 100/400 kHz
Programmers IP01, IP02
IP02 Settings A, DTE
Default Setting DTE
Change Setting DCE
RXD 0
TXD 1
SDA A4
SCL A5
MISO 12
MOSI 11
SCK 13
CS 10
Red pin A0
Green pin A1
Blue Pin A2

Which Board to Select from Tool Menu

  1. Arduino Pro Mini
    • 5V
    • 16Mhz
  2. COM Port (if not found go to Device Programming)

Device Programming

  1. Compatible Programmers
  2. If IP01/IP02 is not detected install the required FTDI Drivers

Additional Software

  1. Installation of RadioHead Library
  2. This is needed to operate the Radio

Featured Samples

No samples available at this time


Featured Projects

No projects available at this time

External Links

Datasheets