Getting Started with the CR12 (Arduino)
From XinaBox Wiki!
(Redirected from Getting Started with the CR12)
 Front | |
 Back | |
| ☒CHIP | |
|---|---|
| Main Category | Core |
| Sub Category | Radio |
| Introduced | 1 January 2017 |
| Current version | 1.0.0 |
| Current version date | 1 January 2017 |
| Dimensions | |
| Size | 2x2U (32x32 mm) |
| Weight | 5.2 g |
| Height | 7.9/1/1.8 mm |
| Non-☒BUS Connections | |
| North | SMA Female Connector (7.5 mm) |
| South | ☒BUS & ☒PDI |
| Main Chip Set | |
| Main Chip | ATmega328P |
| Architecture | AVR |
| Core Size | 8-Bit |
| Max. Frequency | 16 MHz |
| Program Memory Size | 32 kB |
| EEPROM Memory Size | 1 kB |
| RAM Memory Size | 2 kB |
| I2C Speed | 100/400 kHz |
| Compatible Programmers | |
| Programmers | IP01, IP02 |
| IP02 Settings | A, DTE |
| Serial Configuration | |
| Default Setting | DTE |
| Change Setting | DCE |
| Serial Pins | |
| RXD | 0 |
| TXD | 1 |
| I²C Pins | |
| SDA | A4 |
| SCL | A5 |
| SPI Pins | |
| MISO | 12 |
| MOSI | 11 |
| SCK | 13 |
| CS | 10 |
| LED Pins | |
| Red pin | A0 |
| Green pin | A1 |
| Blue Pin | A2 |
Contents
Which Board to Select from Tool Menu
- Arduino Pro Mini
- 5V
- 16Mhz
- COM Port (if not found go to Device Programming)
Device Programming
Additional Software
- Installation of RadioHead Library
- This is needed to operate the Radio
Featured Samples
No samples available at this time
Featured Projects
No projects available at this time
External Links
Datasheets
