Getting Started with the CC03 (Arduino)

From XinaBox Wiki!
Jump to: navigation, search
CC03 - Cortex M0+ Core (ATSAMD21G18/SAMD21G/SAMD21)
CC03 V0.5.0 Front grande.jpg
Front
CC03 V0.5.0 Back grande.jpg
Back
Main Category Core
Sub Category CPU
Introduced 1 January 2017; 2 years ago (2017-01-01)
Current version 1.0.0
Current version date 1 January 2017; 2 years ago (2017-01-01)
Size 2x2U (32x32mm)
Weight 2.9 g
Height 4.2/0/0 mm
South ☒BUS & ☒PDI
Main Chip ATSAMD21G18
Architecture ARM® Cortex®-M0+
Core Size 32 bit
Max. Frequency 48 MHz
Program Memory Size 256 kB Flash
RAM Memory Size 32 kB SRAM
I2C Speed 100/400 kHz
Programmers IP02/IP03
IP02 Settings A, DTE
Default Setting DTE
Change Setting DCE
RXD 1
TXD 0
SDA 20
SCL 21
USB D+ 29
USB D- 28
Red pin A4
Green pin 8
Blue Pin 9

Which Board to Select from Tool Menu

  1. Install Arduino-SAMD Core
  2. Select Board -> Arduino/Genuino Zero(Native USB port)
  3. COM Port (if not found go to Device Programming)

Device Programming

  1. Compatible Programmers
  2. If IP02 is not detected install the required FTDI Drivers

Featured Samples

  1. Sample Dewpoint Serial
  2. Sample Lux Serial
  3. Sample SW10 Serial

Featured Projects

  1. GPS OLED Position Display Using XinaBox
  2. OLED Name Tag using XinaBox and Arduino

External Links

Datasheet

  1. ATSAMD21G18 From Microchip Technology Inc.

Shop

  1. Buy CC03

GitHub

  1. CC03 on GitHub