Getting Started with the CC01 (Arduino)

CC01 - Arduino Pro/Pro Mini(ATmega328P)

Front
Back
☒CHIP
Main Category	Core
Sub Category	CPU
Introduced	1 January 2017 (2017-01-01)
Current version	1.0.0
Current version date	1 November 2017 (2017-11-01)
Dimensions
Size	2x2U (32x32mm)
Weight	3.1 g
Height	4.1/1.6/0 mm
Non-☒BUS Connections
South	☒BUS & ☒PDI
Main Chip Set
Main Chip	ATmega328P
Architecture	AVR®
Core Size	8 bit
Max. Frequency	16 MHz
Program Memory Size	32 kB Flash
EEPROM Memory Size	1 kB
RAM Memory Size	2 kB SRAM
I2C Speed	100/400 kHz
Compatible Programmers
Programmers	IP01, IP02
IP02 Settings	A, DTE
Serial Configuration
Default Setting	DTE
Change Setting	DCE
Serial Pins
RXD	0
TXD	1
I²C Pins
SDA	4
SCL	5
LED Pins
Red pin	5
Green pin	6
Blue Pin	7

Which Board to Select from Tool Menu

1. Install Arduino-AVR Core
2. Select Board -> Arduino Pro or Pro Mini
3. COM Port (if not found go to Device Programming)

Device Programming

1. Compatible Programmers
   • IP01
   • IP02
2. If IP02 or IP01 is not detected install the required FTDI Drivers

Featured Samples

No samples available at this time

Featured Projects

1. Atmospheric Pressure Measurement Using XinaBox ☒CHIPs
2. Easy Peasy Temperature Monitor
3. https://www.hackster.io/Luqmaan/servo-control-with-capacitive-touch-using-xinabox-cd0c36
4. more

External Links

Datasheets

• ATmega328P From Atmel Corporation

Shop

• Buy CC01

GitHub

• xLoader