Error Codes

From XinaBox Wiki!
Jump to: navigation, search

Basic firmware related error codes for Phase 1 Software

Code Code description
E100 SW01 error

Cause: Faulty connector or sensor.

E101 SL01 error

Cause: Faulty connector or sensor.

E102 SI01 error

Cause: Faulty connector or sensor.

E103 SN01 error

Cause: Faulty connector or sensor.

E200 Blynk Connection Fail

Cause: Unable to connect to link.xinabox.cc on port 80 or 8442.

E201 Blynk Auth Token error

Cause: AUTH token invalid or not entered.

E300 MQTT Broker Connection Fail

Cause: Unable to connect to mqtt.xinabox.cc on port 80 or 1883.

E301 MQTT Broker Publish Fail

Cause: Poor internet connection or WiFi disconnected on CW01.

E400 Captive Portal Index Invalid

Cause: Entered Index is longer than 20 characters, index is not alpha-numeric or contains spaces.

E401 Captive Portal Longitude Invalid

Cause: Format of longitude is not in degrees.

E402 Captive Portal Latitude Invalid

Cause: Format of longitude is not in degrees.

E403 Captive Portal Altitude Invalid

Cause: Altitude unit (e.g ft) is added to the input. Altitude must be given in meters.